| Bulletin # |
Date Issued |
Subject |
| INDEX |
2023-12-20 |
SERVICE DOCUMENT MASTER INDEX |
| SB23-05 |
2023-10-03 |
HARTZELL ENGINE TECH (HET) LLC SERVICE BULLETIN (SB) 203 |
| CSB23-04 |
2023-09-13 |
HARTZELL ENGINE TECHNOLOGIES (HET) ALERT SERVICE BULLETIN (ASB) NO. 097 |
| SB23-03 |
2023-05-24 |
HARTZELL ENGINE TECH (HET) SERVICE BULLETIN 096 |
| SB23-02 |
2023-05-04 |
CYLINDER DECK STUD REPLACEMENT. |
| MSB23-01A |
2023-02-16 |
CRANKSHAFT COUNTERWEIGHTS |
| SB22-02 |
2022-12-14 |
PISTON PIN REPLACEMENT |
| CSB673C |
2022-05-24 |
POTENTIAL IMPROPERLY LUBRICATED ROLLER BEARING IN S-1200 SERIES MAGNETOS |
| SIL21-04B |
2021-08-16 |
IMPROVED ROCKER COVER GASKET, PART NO. 668893 |
| SB00-12A |
2021-07-14 |
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS (ICA) FOR CONTINENTAL ENGINE MODELS MANUFACTURED UNDER LICENSE BY ROLLS ROYCE. |
| SB21-03 |
2021-03-21 |
POTENTIAL FAILURE OF OIL TEMPERATURE CONTROL VALVE 657496 |
| SIL21-01 |
2021-03-16 |
PART NO. 801223 TACHOMETER SENSOR |
| SB21-02 |
2021-03-16 |
POTENTIAL CONTAMINATION IN AIR REFERENCE TUBE PART NO. 646418 |
| SSI20-04A |
2020-12-14 |
AMPLIFIED MAINTENANCE AND SERVICING INSTRUCTIONS FOR I0240B ENGINES INSTALLED IN DA20C1 AIRCRAFT OPERATED IN TRAINING FLEETS |
| SB20-06 |
2020-12-14 |
HYDRAULIC LIFTER ASSEMBLIES |
| SIL20-05 |
2020-09-27 |
ENERGIZER STARTER INSTRUCTIONS FOR CONTINUED AIRWORTHINESS |
| MSB18-08C |
2020-09-27 |
INSPECTION AND MAINTENANCE MODIFICATION OF CYLINDER ASSEMBLIES |
| CSB07-1A |
2020-09-02 |
CONNECTING ROD PISTON PIN BUSHING INSTALLATION |
| SB20-03 |
2020-04-13 |
ENGINE PRESERVATION DURING COVID-19 PANDEMIC |
| SB20-02 |
2020-03-16 |
CHECK VALVE CONFIGURATION INSPECTION (P/N 646717) |
| SB20-01 |
2020-02-20 |
FUEL SCREEN ASSEMBLY, SCHEDULED MAINTENANCE |
| MSB18-08B |
2020-01-12 |
INSPECTION AND MAINTENANCE MODIFICATION OF CYLINDER ASSEMBLIES |
| SB19-09 |
2019-12-13 |
CHAMPION AEROSPACE SLICK SERVICE BULLETIN SB2-19 |
| SIL19-08 |
2019-12-12 |
PUSHROD CLEARANCE |
| SB19-07 |
2019-12-10 |
CRANKSHAFT END PLAY CHECK |
| CSB19-01A |
2019-12-05 |
FUEL (PRIMER) DIVERTER VALVE ASSEMBLY |
| CSB19-06 |
2019-11-19 |
HARTZELL ENGINE TECHNOLOGIES (HET) ALERT SERVICE BULLETIN (ASB) NO. 081A |
| SB15-6C |
2019-09-27 |
NIC3 CYLINDER ASSEMBLIES |
| SIL00-7C |
2019-08-07 |
OIL GAGE ROD APPLICATION |
| SIL672 |
2019-07-11 |
ENGINE SUPPLEMENTAL TYPE CERTIFICATE (STC) INSTALLATION INSTRUCTIONS FOR CMI UNPRESSURIZED SHOWER-OF-SPARKS S-1200 MAGNETOS |
| CSB19-03 |
2019-05-21 |
HARTZELL ENGINE TECHNOLOGIES (HET) ALERT SERVICE BULLETIN (ASB) NO. 078 |
| SB19-02A |
2019-04-22 |
CHAMPION AEROSPACE SLICK SERVICE BULLETIN SB1-19 |
| SIL18-06A |
2019-04-10 |
SUPERSEDING MAGNETO AND HARNESS APPLICATIONS |
| SIL671A |
2019-03-25 |
AIRCRAFT SUPPLEMENTAL TYPE CERTIFICATE (STC) INSTALLATION INSTRUCTIONS FOR SHOWER-OF-SPARKS STARTING VIBRATOR BOOSTER SYSTEMS |
| SB15-4A |
2018-12-18 |
CHAMPION AEROSPACE SLICK SERVICE BULLETIN SB1-15A |
| SB18-04A |
2018-12-18 |
REPLACEMENT OF FLANGED NUT (P/N 652541) IDENTIFIED WITH MANUFACTURER'S STAMP "ZB" |
| SB18-07 |
2018-11-19 |
CRANKSHAFT DOWEL (P/N 536563) INSPECTION AND REPLACEMENT INSTRUCTIONS AT MAINTENANCE AND OVERHAUL |
| CSB05-8D |
2018-08-22 |
CAMSHAFT GEAR (P/N 656818) |
| SIL18-05 |
2018-08-22 |
O-470-U CAMSHAFT GEAR CONFIGURATION |
| SIL16-1A |
2018-05-29 |
OPTIONAL 24V STARTERS |
| SB18-03 |
2018-04-09 |
VALVE SPRING IDENTIFICATION |
| SIL18-02 |
2018-02-15 |
APPLICABILITY OF CMI SERVICE DOCUMENTS |
| SSI17-09 |
2017-12-22 |
ENGINE OIL COOLER (P/N 654585), TEMPORARY REPAIR AND INSPECTION INSTRUCTIONS |
| CSB17-08 |
2017-12-13 |
HARTZELL ENGINE TECHNOLOGIES (HET) ALERT SERVICE BULLETIN (ASB) 074 |
| SIL17-07 |
2017-11-14 |
DISCONTINUED ALTERNATOR, 60A, 24V, (P/N 646845) |
| SB17-06 |
2017-10-20 |
CONNECTING ROD BOLT, (P/N 655959) AND CRANKCASE CLEARANCE INSPECTION |
| SB17-05 |
2017-09-29 |
CONTINENTAL MOTORS IGNITION SYSTEMS SERVICE BULLETIN SB643C |
| SB17-04 |
2017-09-29 |
CONTINENTAL MOTORS IGNITION SYSTEMS SERVICE BULETIN SB670 |
| SB643C |
2017-07-21 |
MAINTENANCE INTERVALS for CMI (FORMERLY TCM/BENDIX) S-20, S-200, AND S-1200 SERIES MAGNETOS AND RELATED EQUIPMENT. |
| SB670 |
2017-07-14 |
REPLACEMENT AND MAINTENANCE OF THE CONTINENTAL MOTORS-20, S-200, AND S-1200 SERIES MAGNETO DISTRIBUTOR BLOCK |
| SB16-7 |
2017-02-03 |
HARTZELL ENGINE TECHNOLOGIES (HET) SERVICE BULLETIN (SB) NO. 067 |
| SB16-8 |
2017-02-03 |
TURBO EXHAUST TRANSITION (P/N 657631) |
| SB16-9 |
2017-02-03 |
HARTZELL ENGINE TECHNOLOGIES (HET) SERVICE BULLETIN (SB) NO. 066 |
| SIL14-6A |
2017-02-03 |
SANDCAST CRANKCASE OIL GAGE ROD HOUSING/HOUSING EXTENSTION INSTALLATIONS ON 470, 520, AND 550 ENGINES |
| SB13-4C |
2016-11-07 |
ANEROID EQUIPPED FUEL PUMPS |
| SB16-6 |
2016-10-19 |
ENGINE DAMAGE DUE TO KICKBACK |
| SB15-3A |
2016-08-09 |
OIL SUMP ASSEMBLY INSPECTION |
| CSB97-10B |
2016-07-27 |
PISTON PIN PLUG WEAR. |
| CSB98-1C |
2016-07-27 |
INTAKE AND EXHAUST VALVE INSPECTION. |
| SIL98-3B |
2016-07-27 |
PRODUCTION RELEASE OF NEW INTAKE AND EXHAUST VALVE SPRINGS. |
| SIL04-2A |
2016-07-27 |
CYLINDER BARREL ULTRASONIC INSPECTION |
| MSB94-4H |
2016-07-27 |
STARTER ADAPTER SHAFTGEAR AND CRANKSHAFT GEAR INSPECTION |
| CSB04-6B |
2016-07-27 |
INSPECTION OF TSIO-550 AND TSIOL-550 ENGINES WITH P/N 654867 PISTONS INSTALLED |
| SB10-1A |
2016-07-27 |
EXHAUST AND TURBOCHARGER SYSTEM INSPECTION |
| SB08-4A |
2016-07-27 |
FUEL INJECTION SYSTEM CONTAMINATION |
| SB95-7A |
2016-06-20 |
MANIFOLD VALVE COVER INSPECTION |
| CSB13-1B |
2016-06-17 |
REPLACEMENT OF PART NO. 640560 SET SCREWS INSTALLED ON PART NO. 642100-X (X= -1 THROUGH -6 & -8), 646292-1 AND 646663-1 AND R-642100-3, -4, -5 AND -6 FUEL PRESSURE REGULATORS |
| CSB95-4A |
2016-06-16 |
INTAKE VALVE GUIDE SEAL P/N 646678 INSPECTION |
| SB96-3C |
2016-06-16 |
CRANKSHAFT GEAR BOLT INSPECTION. |
| CSB99-6B |
2016-06-16 |
GTSIO-520 & GIO-550 CRANKSHAFT INSPECTION. |
| SB99-8B |
2016-06-16 |
ENGINE FUEL INJECTION SYSTEM PRESERVATION |
| CSB07-2A |
2016-06-16 |
TURBOCHARGER WASTEGATE OIL INLET FITTING INSPECTION AND REPLACEMENT |
| SB09-4B |
2016-06-16 |
CRANKCASE INSPECTION FOR "PERMOLD" ENGINES EQUIPPED WITH AIR CONDITIONER SYSTEMS INSTALLED FROM 1998 TO PRESENT. |
| SIL10-6A |
2016-06-16 |
OIL COOLER AND VERNATHERM CONTROL VALVE FOR CERTAIN ENGINES EXPERIENCING LOW OIL TEMPERATURES |
| SIL14-4B |
2016-06-16 |
24 VOLT/70 AMP BELT-DRIVEN ALTERNATOR BRACE ALIGNMENT |
| SB00-2B |
2016-06-16 |
IO-346 REPLACEMENT CYLINDER ASSEMBLY KIT |
| SB14-5A |
2016-06-16 |
HARTZELL ENGINE TECHNOLOGIES (HET) SERVICE BULLETIN (SB) NO. 059 |
| CSB14-1A |
2016-06-16 |
CYLINDER BARREL FIN INSPECTION |
| SB16-4 |
2016-06-08 |
INCORRECTLY IDENTIFIED CONTROL LEVERS |
| SB16-5 |
2016-06-08 |
OIL SUCTION TUBE FASTENERS |
| CSB15-7B |
2016-04-26 |
TSIO550-K OIL COOLER CROSS FITTING REPLACEMENT |
| SIL15-9 |
2015-12-11 |
REMOTE MOUNTED OIL COOLERS |
| SIL15-8 |
2015-11-30 |
FRONT MOUNTED ALTERNATOR BRACKET ASSEMBLY INSPECTION |
| CSB15-2C |
2015-11-09 |
OIL COOLER FITTING REPLACEMENT |
| SB15-5 |
2015-10-06 |
CHAMPION AEROSPACE SLICK SERVICE LETTER SL NO. 4300/6300-74-20-001 |
| MSB96-10B |
2015-08-10 |
CRANKSHAFT ULTRASONIC INSPECTION |
| SIL14-9 |
2015-01-09 |
FUEL PUMP MIXTURE CONTROL LEVER CONFIGURATION |
| SSI06-6A |
2014-12-17 |
ALTERNATOR MOUNT BRACKET ASSEMBLY INSPECTION |
| CSB09-11A |
2014-11-12 |
MINIMUM CRUISE RPM |
| SB14-2 |
2014-09-16 |
INSPECTION AND REPLACEMENT OF IO240 STARTER AND CRANKSHAFT CLUSTER GEAR |
| MSB14-3 |
2014-05-02 |
HARTZELL ENGINE TECHNOLOGIES ALERT SERVICE BULLETIN (ASB) NO. 057 |
| SIL05-3A |
2014-04-10 |
ENGINE SPECIFICATION NUMBERS |
| SB13-6A |
2014-04-10 |
CRANKSHAFT GEAR REPLACEMENT |
| MSB13-7 |
2014-01-15 |
HARTZELL ENGINE TECHNOLOGIES ALERT SERVICE BULLETIN (ASB) 048 REV 1 |
| SB13-8 |
2014-01-15 |
HARTZELL ENGINE TECHNOLOGIES SERVICE INFORMATION LETTER A-137 |
| SSI13-5 |
2013-10-03 |
AMPLIFIED OPERATION, MAINTENANCE AND SERVICING REQUIREMENTS FOR CIRRUS SR-20 AIRCRAFT OPERATED BY CIVIL AVIATION FLIGHT UNIVERSITY OF CHINA (CAFUC) ONLY |
| CSB08-3C |
2013-07-17 |
THROTTLE AND MIXTURE CONTROL LEVERS |
| SB12-3 |
2012-10-08 |
CHAMPION AEROSPACE SLICK SB1-12 |
| CSB12-1 |
2012-05-11 |
P/N 641909 LOCK PLATE INSPECTION |
| MSB11-4B |
2012-04-04 |
STARTER ADAPTER SHAFT GEARS |
| SB11-1A |
2011-03-17 |
HARTZELL ENGINE TECHNOLOGIES SERVICE INFORMATION LETTER A-138 |
| SB11-2 |
2011-01-13 |
HARTZELL ENGINE TECHNOLOGIES SERVICE INFORMATION LETTER A-135 |
| SB10-8A |
2011-01-12 |
HARTZELL ENGINE TECHNOLOGIES SERVICE BULLETIN 040A - TURBOCHARGER CHRA CONTAMINATION |
| MSB00-6D |
2010-11-19 |
SLICK SERVICE BULLETIN SB1-00C |
| SID10-4 |
2010-07-12 |
ENGINE MAINTENENCE FOR VOLCANIC ASH CONTAMINATION |
| MSB10-3 |
2010-05-18 |
KELLY AEROSPACE SERVICE BULLETIN 039-A |
| MSB94-8D |
2010-02-17 |
MAGNETO TO ENGINE TIMING |
| MSB09-8A |
2009-12-04 |
INSPECTION AND REMOVAL OF CERTAIN TCM ENGINE HYDRAULIC LIFTERS |
| SB09-14 |
2009-10-16 |
CRANKSHAFT CORROSION TREATMENT |
| SB09-12 |
2009-10-16 |
KELLY AEROSPACE ENERGY SYSTEMS SERV BULL 038A INSPECTION OF SLIP RING END HOUSING FOR CRACKS ES1024-1, TCM 646802 |
| SIL09-15 |
2009-08-06 |
OIL GAGE ROD 632062-3, 4 AND 14 |
| SB09-7 |
2009-07-16 |
POTENTIAL PUSH ROD TUBE PACKING LEAKAGE |
| MSB09-1B |
2009-07-14 |
CYLINDER REPLACEMENT |
| SB09-6A |
2009-06-19 |
VOLARE' CARBURETORS, LLC SB-5 REV A SERVICE BULLETIN |
| SB09-3A |
2009-04-24 |
VOLARE CARBURETORS, LLC SERVICE BULLETIN SB-2 REVISION A, REQUIRED REPLACEMENT OF FOAM FLOATS AND HOLLOW FLOATS |
| SB09-5 |
2009-04-20 |
VOLARE CARBURETORS, LLC SB4 SERVICE BULLETIN, CARBURETOR BOWL TO FLOAT CLEARANCE |
| SB08-8B |
2009-04-10 |
SLICK SERVICE BULLETIN SB2-08A |
| SB09-2 |
2009-03-17 |
VOLARE CARBURETORS, LLC SB1 SERVICE BULLETIN |
| CSB08-9A |
2008-09-30 |
SLICK SERVICE BULLETIN SB3-08A |
| MSB08-2B |
2008-09-17 |
PRECISION AIRMOTIVE LLC FUEL INJECTION SERVO RSA-5, RSA-10 |
| SB08-12 |
2008-09-09 |
CRANKSHAFT GEAR SUPERSEDURE |
| CSB08-11 |
2008-07-10 |
KELLY AEROSPACE POWER SYSTEMS SERVICE BULLETIN 033 |
| SIL08-10 |
2008-07-07 |
PRECISION AIRMOTIVE, LLC SIL RS-88. RSA5, RSA10 SERVO INSPECTIONS OF HEX PLUG GASKET |
| MSB08-5 |
2008-05-28 |
KELLY AEROSPACE SSERVICE BULLETIN 030 |
| SB08-7 |
2008-05-28 |
PRECISION AIRMOTIVE, LLC MANDATORY CARBURETOR SERVICE BULLETIN MSA-14 |
| SB08-1 |
2008-02-05 |
ROCKER SHAFT INSPECTION AND REPLACEMENT |
| SSI07-6 |
2007-08-30 |
IOF-240-B ELECTRONIC CONTROL UNIT (ECU) REPLACEMENT |
| SSI07-5 |
2007-07-31 |
REPLACEMENT OF 6TH ORDER CRANKSHAFT COUNTERWEIGHTS, PINS, BUSHINGS, PLATES AND SNAPRINGS |
| MSB07-4 |
2007-07-30 |
KELLY AEROSPACE POWER SYSTEMS TURBOCHARGER REPLACEMENT |
| SSI06-7A |
2007-01-25 |
IOF-240-B4B ENGINE CONVERSION |
| SB06-5 |
2006-05-25 |
CRANKSHAFT OIL TRANSFER TUBE INSPECTION AND REPLACEMENT |
| SIL06-2 |
2006-04-28 |
UNAPPROVED PARTS NOTIFICATION NO. 2004-00053 |
| SIL06-3 |
2006-04-28 |
CRANKSHAFT GEAR RETAINING SCREW |
| SB05-11 |
2005-12-08 |
PIPER SERVICE BULLETIN 1157A |
| MSB94-4G |
2005-10-31 |
STARTER ADAPTER SHAFTGEAR AND CRANKSHAFT GEAR INSPECTION |
| SB05-9 |
2005-10-17 |
SLICK SERVICE BULLETIN SB1-88B |
| SIL642B |
2005-03-09 |
MANUFACTURING NUMBER (SERIAL NUMBER) INTERPRETATION |
| SB04-10 |
2004-10-26 |
PISTON POSITION MARKING |
| CSB04-5A |
2004-08-20 |
TELEDYNE CONTINENTAL MOTORS IGNITION SYSTEMS CRITICAL SERVICE BULLETIN CSB665A |
| SB03-5 |
2003-10-02 |
NEW LIMITS FOR CRANKSHAFT END CLEARANCE |
| SB03-4 |
2003-07-21 |
INSPECTION OF OIL GAUGE ROD AND CAP ASSEMBLIES, P/N 652171-22 AND P/N 652171-27. |
| CSB02-2C |
2002-12-11 |
STARTER ADAPTER SHAFT SEAL INSPECTION. |
| SB01-3A |
2002-12-10 |
TELEDYNE CONTINENTAL MOTORS P/N 649304A1 AND P/N 649305A1 GEAR-DRIVEN ALTERNATORS. |
| SB02-9 |
2002-10-25 |
CYLINDER HEAD TO BARREL SEEPAGE P/N 654972 CYLINDER ASSEMBLY. |
| CSB02-8 |
2002-09-06 |
TELEDYNE CONTINENTAL MOTORS IGNITION SYSTEM CRITICAL SERVICE BULLETIN CSB664. |
| SB02-7 |
2002-06-28 |
TELEDYNE CONTINENTAL MOTORS IGNITION SYSTEM SERVICE BULLETIN SB663. |
| SIL02-5 |
2002-04-04 |
INDUCTION HOSE CLAMP. |
| SB02-3 |
2002-01-31 |
MAGNETO TACHOMETER SENSORS. |
| SB01-5 |
2001-10-18 |
STARTER ADAPTER BEVEL GEAR INSPECTION |
| MSB00-5D |
2001-10-17 |
CRANKSHAFT MATERIAL INSPECTION. |
| SIL01-2B |
2001-09-04 |
PRECISION AIRMOTIVE CORPORATION SIL RS-59 REVISION 2. |
| SIL01-4 |
2001-09-04 |
PRECISION AIRMOTIVE CORPORATION SIL RS-60. |
| CSB01-1 |
2001-04-25 |
FUEL PUMP INSPECTION AND SEAL LEAK TEST. |
| M81-8R1 |
2001-02-05 |
FUEL PUMP SCREEN RESTRICTION |
| SB00-10 |
2000-12-19 |
FUEL PUMP SEAL P/N 649198. |
| MSB00-5C |
2000-04-14 |
CRANKSHAFT MATERIAL INSPECTION |
| SB00-4A |
2000-03-07 |
AUSTRALIAN AVGAS CONTAMINATION. |
| MSB99-3C |
1999-07-27 |
CRANKSHAFT INSPECTION. |
| SIL99-4 |
1999-05-19 |
TSI0-520-UB EXHAUST TAIL PIPE |
| SIL99-5 |
1999-05-19 |
TCM PART NUMBER 629141 THERMO UNIT |
| SB98-8 |
1998-10-22 |
NUMBER ONE AND THREE CYLINDER INTAKE TUBE MODIFICATION. |
| SB98-4 |
1998-06-12 |
EXHAUST SYSTEM INSPECTION. |
| SB660 |
1997-12-05 |
POSSIBLE MALFUNCTION IN CERTAIN PUSH-TO-START IGNITION/STARTER SWITCHES. |
| SB97-15 |
1997-12-05 |
TCM IGNITION SYSTEM SERVICE BULLETIN SB660. |
| SB97-13 |
1997-10-30 |
REPLACEMENT FUEL PUMP FOR TSIO-520-BE ENGINE. |
| SIL97-12 |
1997-10-14 |
INSTALLATION OF STARTER ADAPTER SHAFT SEAL AND ASSOCIATED PARTS. |
| CSB97-10A |
1997-06-19 |
PISTON PIN PLUG WEAR |
| SID97-8 |
1997-05-28 |
INTERFERENCE OF TCM 24 VOLT 60 AMPERE GEAR DRIVEN ALTERNATOR AND CRANKCASE THROUGH BOLT. |
| CSB97-9 |
1997-05-28 |
GTSIO-520 CRANKCASE INSPECTION. |
| SID97-7 |
1997-05-07 |
PRECISION AIRMOTIVE CORPORATION SERVICE BULLETIN MSA-10. |
| SB97-5 |
1997-03-31 |
INSTALLATION OF FLANGED TYPE FRONT MAIN BEARINGS. |
| SIL97-1 |
1997-01-03 |
AIRWORTHINESS LIMITATIONS. |
| CSB96-13 |
1996-11-14 |
IO-360, TSIO-360 AND LTSIO-360 SERIES ENGINE CONNECTING ROD INSPECTION AND REPLACEMENT. |
| SIL96-9 |
1996-08-12 |
OIL PRESSURE RELIEF VALVE SPRING. |
| CSB96-8 |
1996-06-25 |
REPLACEMENT OF AIRMELT (NON-VAR) CRANKSHAFTS |
| SID96-6 |
1996-05-03 |
TCM IGNITION SYSTEMS SERVICE BULLETIN SB653. |
| SB96-4 |
1996-04-12 |
IMPROVED OIL PUMP GEARS AND SUCTION SCREENS |
| CSB96-5 |
1996-04-11 |
OIL PUMP DRIVE GEARS, P/N 649506 AND 649681 |
| CSB96-2 |
1996-03-21 |
CRANKCASE OIL PASSAGE INSPECTION |
| CSB96-1 |
1996-03-01 |
STARTER GEAR AND CLUTCH ASSEMBLY P/N 653575 |
| MSB95-6 |
1995-10-19 |
FUEL PUMP DRIVE COUPLING |
| SB94-3A |
1995-05-23 |
INDUCTION SYSTEM HOSE AND CLAMP REPLACEMENT |
| SB653 |
1995-05-23 |
HOT MAGNETO TEST |
| CSB95-1A |
1995-04-05 |
INSPECTION AND REPLACEMENT OF DUKES INCORPORATED TURBOCHARGER OIL OUTLET CHECK VALVE PART NUMBER 367-00, (TCM P/N 641068). |
| CSB94-15 |
1994-12-02 |
CRANKCASE STUD INSPECTION |
| SIL94-10 |
1994-11-14 |
REPLACEMENT OF INTAKE VALVE ROTOCOILS |
| SB94-11 |
1994-11-14 |
OIL PUMP GASKET P/N 643749 |
| SID94-12 |
1994-11-14 |
PRECISION AIRMOTIVE CORPORATION SERVICE BULLETIN - MSA-7. |
| SB94-13 |
1994-11-14 |
PISTON RING SET, PART NUMBER 649226 AND CYLINDER KIT PART NUMBERS 653443A3, 653443A3BP, 653443A5, 653443A5BP, 653444A4, 653444A4BP, 653455A2 AND 653455A2BP. |
| MSB94-9 |
1994-10-21 |
INSPECTION OF ENGINE MOUNT BRACKET, PART NUMBER 630695; REPLACEMENT OF ENGINE MOUNT BRACKETS, PART NUMBERS 630694 AND 630695 |
| SIL648 |
1994-10-18 |
OPTIONAL CONVERSION TO "SHOWER-OF-SPARKS" IGNITION |
| SB94-7 |
1994-09-14 |
CRANKSHAFT FLANGE TIMING MARKS |
| MSB645 |
1994-04-04 |
INSPECTION OF RIVETED IMPULSE COUPLINGS AND STOP PINS |
| MSB644 |
1994-04-04 |
REPLACEMENT OF MAGNETO COILS AND ROTATING MAGNETS |
| CSB641 |
1994-02-01 |
POSSIBLE OPEN CONDITION OF SC-20, SC-200 AND S-1200 SERIES MAGNETO CAPACITOR, P/N 10-349276. |
| CSB94-1 |
1994-02-01 |
TELEDYNE CONTINENTAL MOTORS IGNITION SYSTEMS SERVICE BULLETIN - NO. CSB641 |
| SIL640 |
1994-02-01 |
NEW SERVICE DOCUMENT FORMAT |
| SIL93-14 |
1993-08-24 |
CFC WARNING STATEMENT |
| CSB93-13 |
1993-08-12 |
CARBURETOR AIR INTAKE HOUSING ASSEMBLY INSPECTION |
| MSB93-12 |
1993-05-12 |
VALVE RETAINER KEY INSTALLATION INSPECTION |
| M93-10 |
1993-03-01 |
TCM IGNITION SYSTEMS SERVICE BULLETIN NO. 639 |
| 639 |
1993-03-01 |
PROPER INSTALLATION OF IMPULSE COUPLINGS |
| M93-8 |
1993-02-19 |
ROCKER ARM TO ROTOCOIL CLEARANCE |
| M93-5 |
1993-02-19 |
CHAMFER OF CRANKCASE MAIN BEARING OIL FEED HOLES |
| M93-4 |
1993-02-12 |
CRANKSHAFT COUNTERWEIGHTS |
| M92-14 |
1992-09-09 |
NEW MODINE OIL COOLERS, P/N 635996, 646685, 649479 AND 652759 |
| M92-12 |
1992-08-27 |
NEW AND REBUILT ALTERNATOR THRU-BOLT TORQUE INSPECTION, P/N'S 649304, 649305 (WITH DRIVE COUPLING), 649304R AND 649305R (WITH DRIVE COUPLING) |
| M92-10 |
1992-08-14 |
STARTER ADAPTER |
| 636 |
1992-08-01 |
BENDIX/TCM IGNITION SWITCH INSPECTION |
| M92-9 |
1992-05-29 |
FLANGED .500 THRU BOLT NUT, P/N 652541 |
| M92-8 |
1992-05-29 |
APPLICATION OF 4-1/6" DIAMETER CYLINDER ASSEMBLIES |
| M92-7 |
1992-05-26 |
CRANKCASE CYLINDER DECK STUDS |
| M92-6 |
1992-02-28 |
ROCKERSHAFT RETENTION IMPROVEMENT FOR INCLINED VALVE CYLINDER |
| M92-5 |
1992-02-28 |
PRECISION AIRMOTIVE CORPORATION MANDATORY SERVICE BULLETINS #MSA-1 REV. 1 AND MSA-2 REV. 1 |
| M92-4R1 |
1992-02-05 |
IO AND L/TSIO360 ROCKER SHAFT STUD INSPECTION |
| M91-12 |
1991-12-11 |
NEW OIL GAUGE ROD HOUSING |
| M91-10R1 |
1991-11-27 |
INSPECTION FOR CORRECT OIL PICK-UP TUBE INSTALLATION |
| M91-7 |
1991-03-20 |
CYLINDER BARREL ULTRASONIC INSPECTION |
| M91-6 |
1991-03-20 |
CYLINDER BARREL INSPECTION |
| M91-4 |
1991-02-11 |
PISTON IDENTIFICATION AND PISTON RING APPLICATION BULLETIN |
| M90-20 |
1990-12-20 |
LEAR ROMEC CORPORATION, SERVICE BULLETIN NO.101SB019 |
| M90-19 |
1990-10-16 |
FUEL INLET TEE |
| M90-16 |
1990-08-22 |
7TH STUD IMPROVEMENT ON TCM CRANKCASES |
| M90-15 |
1990-08-21 |
ROCKER ARM AND PUSH ROD INSPECTION |
| M90-13 |
1990-07-16 |
EXHAUST VALVE STEM CORROSION/EROSION |
| M90-10 |
1990-04-11 |
STANDBY VACUUM PUMP OIL LEAK CHECK/INSPECTION |
| M90-8 |
1990-03-22 |
EXHAUST SYSTEM INSPECTION |
| M90-6 |
1990-02-26 |
INSPECTION AND REPLACEMENT OF SCAVENGE PUMP GEARS P/N 635334 AND 639388 |
| M89-23 |
1989-09-25 |
TSIO520CE LOWER THROTTLE BODY SUPPORT BRACKET AND LINKAGE |
| M89-19 |
1989-09-18 |
RE-DESIGN OF LOWER THROTTLE BODY BRACKET |
| M89-18 |
1989-08-10 |
EXHAUST GAS TEMPERATURE (E.G.T.) RECOMMENDATIONS FOR STANDARD ENGINES ( LEANING LEAN ) |
| M89-14 |
1989-06-29 |
THRU BOLT TORQUE CHECK AND VISUAL INSPECTION #2 MAIN BEARINGS |
| M89-6 |
1989-03-10 |
COMPRESSOR BELT SHEAVE ALIGNMENT AND BELT TENSIONING |
| M88-15 |
1988-10-10 |
FACET SERVICE BULLETIN A1-88 |
| M88-13 |
1988-09-26 |
INDUCTION TUBE CRACKING |
| M88-12 |
1988-09-09 |
PIPER AIRCRAFT MANDATORY SERVICE BULLETIN NO. 892 |
| M88-5 |
1988-04-04 |
STARTER ADAPTER SHAFTS (REFERENCE SERVICE BULLETIN M87-24) |
| M88-4 |
1988-01-15 |
TCM PRO-TECH OIL FILTER |
| M87-26 |
1987-12-21 |
PISTON PIN REPLACEMENT AND THRU BOLT TORQUE CHECK |
| M87-24 |
1987-12-15 |
BROKEN STARTER ADAPTER SHAFTS |
| M87-25 |
1987-12-15 |
PISTON PIN REPLACEMENT AND THRU BOLT TORQUE CHECK |
| M87-23 |
1987-11-24 |
CRANKSHAFT COUNTERWEIGHT IDENTIFICATION AT OVERHAUL |
| M87-14R1 |
1987-10-08 |
TURBOCHARGER CHECK VALVE CLAMPS |
| M87-21 |
1987-10-07 |
OPERATION AND SERVICE |
| M87-17 |
1987-08-28 |
IMPROVED OIL PUMP SUCTION TUBE ASSEMBLY |
| M87-16 |
1987-08-14 |
SLICK SERVICE BULLETIN SB1-86A |
| M87-8 |
1987-02-26 |
EXHAUST VALVE INSPECTION |
| M87-6 |
1987-02-16 |
ROMEC SERVICE BULLETIN NO. 101SB015 FUEL PUMP P/N RR36090C (TCM P/N 643367) |
| M86-20 |
1986-12-15 |
AIR/OIL SEPARATOR DRAIN MODIFICATION |
| M86-13R1 |
1986-10-17 |
CAMSHAFT PLUG INSPECTION AND OVERHAUL MANUAL REVISION |
| M86-14 |
1986-10-01 |
CAMSHAFT 629726 REWORK |
| M86-9 |
1986-03-20 |
CRANKCASE MODIFICATION |
| M86-5 |
1986-02-04 |
MANIFOLD PRESSURE LINE ADAPTER IMPROVEMENT |
| M85-6 |
1985-04-25 |
GARRETT SERVICE LETTER TP61-0001, REV. E |
| M85-3 |
1985-02-04 |
EXHAUST VALVES IN P/N 646680 CYLINDER ASSEMBLIES |
| M84-13 |
1984-10-27 |
SLICK SERVICE BULLETIN NO. SB 1-84 |
| 623A |
1984-08-01 |
INSPECTION OF IMPULSE COUPLING CAM ASSEMBLIES |
| 617B |
1984-05-01 |
INSPECTION AND/OR REPLACEMENT OF DISTRIBUTOR GEARS IN D-2000/2200 SERIES MAGNETOS |
| M84-7 |
1984-04-18 |
643797 TURBO INLET CHECK VALVE |
| M84-3 |
1984-01-18 |
INDUCTION MANIFOLD HOSE INSPECTION |
| M83-8R1 |
1983-07-15 |
FUEL PUMP REPLACEMENT |
| M81-15R1 |
1983-06-16 |
PRESTOLITE 100 AMP ALTERNATOR EXCHANGE |
| M81-4R1 |
1983-04-29 |
AID SERVICE BULLETIN TP60-0120 - AID SERVICE LETTER TP61-0046 |
| M83-6 |
1983-03-07 |
SLICK SERVICE BULLETIN 2-82 |
| M83-5 |
1983-03-07 |
SLICK SERVICE BULLETIN 3-82 |
| M83-3 |
1983-02-14 |
ROTO MASTER (RAJAY) SERVICE LETTER 27 REVISION A DATED SEPTEMBER 24, 1982 AND ADDENDUM THERETO DATED FEBRUARY 9, 1983 IN RESPONSE TO FAA AD 82-07-03. |
| M82-13 |
1982-10-27 |
FUEL CONTROL INLET FITTING |
| M82-7 |
1982-05-13 |
TUBE ASSEMBLY (AIR REFERENCE TUBE) |
| M82-5 |
1982-04-26 |
FUEL PRESSURE REGULATOR 642100-5 & 642100-6 ON ENGINES INSTALLED IN CESSNA 340 AND 414 SERIES AIRCRAFT. |
| M82-3 |
1982-03-08 |
LEAR SIEGLER, INC., ROMEC DIVISION, FUEL PUMP, TCM P/N 643367A1 |
| M81-23R1 |
1982-02-12 |
360 SERIES OIL PUMP DRIVE GEAR |
| M81-6R2 |
1982-01-29 |
FUEL HOSES |
| M81-26 |
1981-12-04 |
PRESSURIZATION OF MAGNETOS IN MOONEY M20K AIRCRAFT |
| M81-19 |
1981-08-05 |
AVAILABILITY OF NEW TCM P/N 646220 AND 646019 FLEXIBLE ELBOWS |
| M81-18 |
1981-08-05 |
AIR REFERENCE HOSES |
| 619 |
1981-08-01 |
REPLACEMENT OF DISTRIBUTOR GEARS IN D-3000/3200 SERIES (BLUE) MAGNETOS |
| M81-17 |
1981-07-27 |
BY-PASS VALVE MODIFICATION - AIRESEARCH SERVICE LETTER TP61-0039 |
| M81-16 |
1981-07-27 |
TURBOCHARGER CENTER HOUSINGS |
| M81-13R1 |
1981-07-18 |
SLICK SERVICE BULLETIN 1-81 (REVISED) |
| 618 |
1981-06-01 |
REPLACEMENT OR INSPECTION OF DISTRIBUTOR GEARS IN D-3200 SERIES PRESSURIZED (BLUE) MAGNETOS |
| M81-12 |
1981-05-11 |
INSTALLATION INSTRUCTIONS AND REWORK INSTRUCTIONS FOR THE PART NO'S 642266 & 643935 ALTERNATOR BRACKETS |
| M81-10 |
1981-03-09 |
REPLACE DIPSTICK P/N 632062-2 WITH P/N 632062-29 |
| M81-9 |
1981-03-09 |
NOSE SEAL RETAINER PLATES |
| 614 |
1981-02-01 |
REPAIR OF CERTAIN STARTING VIBRATORS UTILIZING "5" CONTACT BUSHING (CONNECTOR) |
| M80-25 |
1980-10-24 |
INSTALLATION INSTRUCTIONS FOR AIR CONDITIONING KITS |
| M80-24 |
1980-09-18 |
EXHAUST TAILPIPE MODIFICATION |
| M80-14 |
1980-04-28 |
FREON COMPRESSOR BRACKET |
| M80-11 |
1980-04-14 |
INTAKE MANIFOLD TUBE DRAIN BOSSES |
| M80-10 |
1980-03-28 |
REPLACEMENT OF SOME P/N 642232 FLEXIBLE ELBOWS |
| 605A |
1979-11-01 |
INSPECTION OF D-2000/D-2200 SERIES MAGNETOS, ETC. (SEE TEXT FOR FULL SUBJECT) |
| M79-15 |
1979-09-04 |
FREON COMPRESSOR BRACKET ALIGNMENT |
| M79-12 |
1979-08-01 |
STARTER ADAPTER SHEAVE |
| 606 |
1979-04-01 |
D-2000/D-2200 SERIES MAGNETOS USING GREEN DISTRIBUTOR BLOCKS |
| M79-4 |
1979-02-14 |
FUEL INJECTION ADJUSTMENT AND FLIGHT TESTING PROCEDURES OF TIARA 6-285 SERIES ENGINE |
| M78-16 |
1978-11-29 |
NUMBER TWO CYLINDER INTAKE ELBOW TUBE, TCM PART NO. 629138 |
| M78-5R3 |
1978-10-23 |
FLEXIBLE ELBOW TCM PART NUMBER 635930 |
| M78-8 |
1978-08-25 |
IGNITION SYSTEM MAINTENANCE |
| M78-9 |
1978-08-23 |
CRANKCASE, CRANKSHAFT AND BEARING APPLICATIONS |
| 590A |
1978-05-01 |
ROTATING MAGNET TO HOUSING CLEARANCE, D-2000/D2200 SERIES MAGNETOS |
| 600 |
1978-05-01 |
10-353110 BEARING IN D-2000/D-2200 SERIES MAGNETO |
| M78-6 |
1978-03-03 |
REMOVAL AND RE-INSTALLATION OF SPECIAL ROSAN EXHAUST PORT STUDS |
| M78-3 |
1978-01-11 |
GOVERNOR OIL TRANSFER COLLAR SLEEVES, RETAINING CLIPS AND CLEARANCES |
| M78-2 |
1978-01-10 |
TURBOCHARGER OIL SUPPLY LINE AND FITTING CHANGE: TCM SERVICE KIT EQ6536 |
| M77-19 |
1977-08-12 |
INTAKE AND EXHAUST ROCKER ARM IDENTIFICATION AND APPLICATION |
| M77-9 |
1977-03-16 |
THRU BOLT CHANGE |
| 587 |
1977-02-01 |
INSPECTION OF D-2000 SERIES MAGNETO CAPACITORS AND CAPACITOR LEAD CRIMP TERMINALS |
| M76-22 |
1976-08-30 |
COMPLIANCE WITH RAJAY BULLETIN #21A |
| M76-15 |
1976-06-17 |
FUEL PUMPS |
| M76-12 |
1976-05-24 |
CHROME PLATING OF CYLINDERS |
| 583 |
1976-04-01 |
IGNITION SWITCHES, ROTARY ACTION, KEY OR LEVER ACTUATED, TWIST-TO-START, PUSH-TO-START, TWIST-TO-START/PUSH-TO-PRIME TYPES. |
| M76-7 |
1976-03-25 |
P/N 634021 ALTERNATOR FACE DRIVE GEAR LOCKPLATES |
| M75-30 |
1975-12-19 |
PRESTOLITE ALTERNATORS |
| M75-15 |
1975-07-14 |
NEW CARBURETOR AIRBOX |
| 556C |
1975-07-01 |
SHOULDERED MAGNETO DRIVE SHAFT BUSHING, CHANGE FROM SINTERED IRON TO MACHINED STEEL. |
| M75-14 |
1975-06-30 |
635014 AIR THROTTLE BRACKET ASSEMBLIES |
| M75-6R1 |
1975-06-04 |
CONVERSION OF ENGINES FROM ONE MODEL TO ANOTHER |
| M75-7R1 |
1975-04-04 |
OIL FILTER CHANGE |
| M74-18 |
1974-09-16 |
COMPLIANCE WITH SLICK BULLETIN 1-74 |
| M73-13 |
1973-07-10 |
REAMING AND BUSHING ROCKER SHAFT BOSSES |
| M73-6R1 |
1973-06-11 |
PRESTOLITE ALTERNATOR COOLING FAN MAINTENANCE AND INSPECTION |
| M73-12 |
1973-06-08 |
MARVEL-SCHEBLER CARBURETOR BULLETIN A1-73 |
| M73-2 |
1973-01-17 |
FAA AIRWORTHINESS DIRECTIVE NO. 72-20-2 |
| M72-8 |
1972-06-21 |
NEW DESIGN SPLINED DRIVE SCAVENGE PUMP SHAFT AND GEAR ASSEMBLY |
| M71-20 |
1971-08-20 |
INSTALLATION INSTRUCTIONS FOR THE COMPRESSOR SHEAVE TO THE STARTER ADAPTER (637778) |
| M70-11 |
1970-06-22 |
SLICK ELECTRO BULLETIN 1-70 |
| M70-7 |
1970-03-17 |
INCREASING SIZE OF OIL FEED HOLES TO STARTER ADAPTER SHAFTGEAR |
| M70-3 |
1970-02-03 |
CRANKCASE MODIFICATION RECOMMENDED AT NEXT ENGINE MAJOR OVERHAUL |
| M64-18 |
1968-10-07 |
FIELD CONVERSION TO TURBOCHARGING OF CONTINENTAL AIRCRAFT ENGINES |
| M67-5 |
1967-05-02 |
LAGGING ENGINE BREATHER LINE ON GTSIO520 ENGINES |